It is currently March 29th, 2024, 2:18 am

60CE Yamaha's and Mariners....SHORT SHAFTS

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 10 posts ] 
Author Message
 PostPosted: December 4th, 2016, 3:29 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3006
These are by far the most difficult motors to find. They are the 15 inch mids. The 90 hp Yamaha bolts on the mid. They have the small foot with the 1:71 foot.
Chris is the last person up here to get one. His was a Mariner and he made it into a 90 hp Yamaha short shaft with a drive shaft adapter so he could use the original 1:71 foot.
Matt just purchased a long shaft and is looking into converting it to a short shaft.

Here is an original one that just came on the internet. NOTICE: the low production number on the serial number plate
http://www.nettivaraosa.com/veneen-varu ... at/2363785

The Mariner model is exactly the same except for a few years when Yamaha used the Pro 50 clamp bracket assembly on their motor.
This is one of those motors.


Top
 Profile Send private message  
 PostPosted: December 4th, 2016, 4:19 pm   
Member
User avatar

Joined: June 5th, 2015, 8:56 am
Posts: 514
Nice find Don. Interesting to see decent pics of it.

_________________
Critchfield T850 OMC 75 49ci
Delta T750 Yamaha 55
1989 Voodoo Yamaha 70
1980 Thundercraft v142 Restored


Top
 Profile Send private message  
 PostPosted: December 4th, 2016, 4:34 pm   
Member
User avatar

Joined: June 5th, 2015, 8:56 am
Posts: 514
I wouldn't say mine is the same. Mine is a "675" not "6F0". The 6F0 has the larger bore pistons, more compression.

_________________
Critchfield T850 OMC 75 49ci
Delta T750 Yamaha 55
1989 Voodoo Yamaha 70
1980 Thundercraft v142 Restored


Top
 Profile Send private message  
 PostPosted: December 4th, 2016, 6:37 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3006
The name on the invoice is Henry so there is a chance he understands English. I don't see any gear case, but for 200E or $285. canadian the mid is worth the price. I would not take the other parts. You have the more common 675 model and you can get those parts here. The short shaft tuner is different on the 675 and I have a contact here who has one.


Top
 Profile Send private message  
 PostPosted: December 4th, 2016, 8:32 pm   
Member
User avatar

Joined: June 5th, 2015, 8:56 am
Posts: 514
Don,
how would one know if a 675 powerhead will bolt to a 6F0 mid? I remember you saying that your 6F0/6F1 powerhead didn't line up or something..

_________________
Critchfield T850 OMC 75 49ci
Delta T750 Yamaha 55
1989 Voodoo Yamaha 70
1980 Thundercraft v142 Restored


Top
 Profile Send private message  
 PostPosted: December 5th, 2016, 12:49 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3006
mattmak wrote:
Don,
how would one know if a 675 powerhead will bolt to a 6F0 mid? I remember you saying that your 6F0 powerhead didn't line up or something..


My problem is the drive shaft. The one I have is 3/16's of an inch too long. I will need to cut 3/16's off the top and lengthen the spline.
I am hoping to find another one this winter rather than cut up the one I have.. The base plate could be different on that mid, but you can switch your current base plate without any problem. The bolt pattern to mount the powerhead is the same.


Top
 Profile Send private message  
 PostPosted: December 7th, 2016, 11:54 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3006
I got an e-mail asking me if the 60CE 6F0 is the race motor.
NO the race model is 60DE 6F1.
So far I have not been able to find any parts pictures or a parts book
I have seen a picture of the motor on a T boat and I posted that video of one pulling a tube.
https://www.youtube.com/watch?v=KK2PdG1Sg5s
Hear say info is:
- the outside appearance is the same as the stock CE model
- the tuner is two individual tuners, one for each cylinder
- the carbs are offset???
- they ran strong, but didn't last??
- most racers ended up using the stock powerhead after the 6F1 blew up

The last person I contacted in Britain had one on EBAY with a Bristol raceboat. He agreed to sell me the motor only and was to send pictures. At the last minute someone purchased the complete outfit and I never got the pictures.

I welcome any information on the 60DE 6F1 you can post.

Here are some race pictures from the 1980's. There are a few pictures of the 60DE 6F1 boats and motors.
There are also pictures of other classes including other V bottom classes running 3, 4 and 6 cylinder motors.
https://www.flickr.com/photos/kwmc/sets ... 563910744/


Top
 Profile Send private message  
 PostPosted: June 16th, 2017, 12:12 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3006
FINALLY got a picture of a 60D Yamaha RACING powerhead and the actual tuner.
The tuner is a 2 into one stainless pipe. Should be easy to copy.
https://www.gumtree.com/p/boats-kayaks- ... 1248472726

Matt this fellow has loads of parts for sale....including a 60D tuner
https://www.gumtree.com/p/boats-kayaks- ... 1248471572

Matt an exhaust option could be to use the Nissan pipe and shorten it.
http://www.boats.net/parts/detail/nissa ... 311-0.html


Top
 Profile Send private message  
 PostPosted: June 16th, 2017, 10:47 am   
Member
User avatar

Joined: June 5th, 2015, 8:56 am
Posts: 514
Wow, cool stuff Don.

Don, do you know if the larger block like that one bolts to the standard (55/48hp) adapter plate and mid?

It is possible that I can have my non-race small block assembled soon. Long shaft config though.

too bad that collection is overseas...

_________________
Critchfield T850 OMC 75 49ci
Delta T750 Yamaha 55
1989 Voodoo Yamaha 70
1980 Thundercraft v142 Restored


Top
 Profile Send private message  
 PostPosted: June 16th, 2017, 11:06 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3006
mattmak wrote:
Don, do you know if the larger block like that one bolts to the standard (55/48hp) adapter plate and mid?...


Matt, I think it does. By the pictures it looks like this fellow has 3 long shaft models. The muffler assembly in the top left has the separate muffler shell so it is a 6F0 model. Two of the 3 blocks look the same. The 60D tuner base plate is an odd shape. I think your motor will be fine. I would like to know if the stamp number on that larger carb is 6F1.


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010