no gps.
.. i had a 27 srx 1.87 gears and was reving 6200 rpm the last time i saw the tach 
| HPBCANADA.COM http://www.hpbc.ca/ |
|
| Boomer you idiot http://www.hpbc.ca/viewtopic.php?f=19&t=2359 |
Page 2 of 3 |
| Author: | DoktorC [ July 25th, 2014, 3:17 pm ] |
| Post subject: | Re: Boomer you idiot |
OOOPS....Nice! Sorry for your loss..but that's a great way to go down..pal. |
|
| Author: | beavertonae-21 [ July 25th, 2014, 8:30 pm ] |
| Post subject: | Re: Boomer you idiot |
sorry to hear Boomer, hopefully an easy fix? do you have to bore or re plate? |
|
| Author: | BoomerMuskoka [ July 25th, 2014, 9:35 pm ] |
| Post subject: | Re: Boomer you idiot |
no gps. .. i had a 27 srx 1.87 gears and was reving 6200 rpm the last time i saw the tach
|
|
| Author: | BoomerMuskoka [ July 25th, 2014, 9:40 pm ] |
| Post subject: | Re: Boomer you idiot |
beavertonae-21 wrote: sorry to hear Boomer, hopefully an easy fix? do you have to bore or re plate? i haven't taken it right apart yet so i don't know the full damage report yet. i know #5 is toast but is not a big deal its steel bore i can clean the aluminum off and hone it. i hope the other 5 are ok they are chrome. i will have too pull it right apart too inspect. there goes my weekend, 
|
|
| Author: | BoomerMuskoka [ July 25th, 2014, 9:49 pm ] |
| Post subject: | Re: Boomer you idiot |
DoktorC wrote: OOOPS....Nice! Sorry for your loss..but that's a great way to go down..pal. id say it needed more clearance in that hole anyway
|
|
| Author: | BoomerMuskoka [ July 26th, 2014, 9:55 am ] |
| Post subject: | Re: Boomer you idiot |
 that'll learn ya!! |
|
| Author: | allstock [ July 26th, 2014, 10:44 am ] |
| Post subject: | Re: Boomer you idiot |
BoomerMuskoka wrote: that'll learn ya!! Ya that'll learn ya ta stick with the rice motors! I had a few bp's back in the day, my hands were always dirty!! Haha oh well looks like an easy fix. |
|
| Author: | BoomerMuskoka [ July 26th, 2014, 11:36 am ] |
| Post subject: | Re: Boomer you idiot |
its funny you can see 3 spots of aluminum on the sleeve right where the water comes into the block.. i think this motor might of lived if i put stuffers in the block and let it warm up 
|
|
| Author: | allstock [ July 26th, 2014, 1:51 pm ] |
| Post subject: | Re: Boomer you idiot |
Don't kick yourself too hard Boomer, it's not like you stood on it from stone cold. It had ran for several minutes before it stuck. Cold seizure is more rare than people think, but it gets blamed for a lot of scuffed pistons! |
|
| Author: | BoomerMuskoka [ July 26th, 2014, 5:05 pm ] |
| Post subject: | Re: Boomer you idiot |
im back !! https://www.youtube.com/watch?v=ctX4WGz ... e=youtu.be |
|
| Page 2 of 3 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |