| HPBCANADA.COM http://www.hpbc.ca/ |
|
| marine/outdoor carpet adhesive http://www.hpbc.ca/viewtopic.php?f=19&t=2992 |
Page 1 of 1 |
| Author: | mattmak [ August 1st, 2015, 10:45 am ] |
| Post subject: | marine/outdoor carpet adhesive |
Can anyone suggest a marine/outdoor carpet adhesive that isn't too hard to find here in Canada (Ontario)? Most of the ones at can tire / rona / home depot are the newer style, low VOC, eco ones, and I'm worried they won't hold up over time.. This might get left out in the rain every once in a while, and the boat is used in near freezing temps once in a while too. I found some Roberts R6040 solvent based adhesive at a local carpet store but it had passed its shelf life by 3 years so I left it behind. So any recommendations? Does the modern low VOC big box store outdoor carpet adhesive hold up well over time? M |
|
| Author: | Tomcat [ August 1st, 2015, 1:26 pm ] |
| Post subject: | Re: marine/outdoor carpet adhesive |
Find a commercial carpet supplier in your area that sell to trades. They'll fix you up |
|
| Author: | Carson [ August 1st, 2015, 1:52 pm ] |
| Post subject: | Re: marine/outdoor carpet adhesive |
I like to leave to carpet floating And just hold it in with some snaps like the boat tops. Nice to let it air out once and a while. |
|
| Author: | beavertonae-21 [ August 4th, 2015, 2:45 pm ] |
| Post subject: | Re: marine/outdoor carpet adhesive |
I used contact cement in my AE. sparingly lol seems to hold up well. |
|
| Author: | DoktorC [ August 4th, 2015, 3:42 pm ] |
| Post subject: | Re: marine/outdoor carpet adhesive |
I used indoor/outdoor carpet adhesive from home hardware...worked great. |
|
| Author: | Northbase [ August 4th, 2015, 4:34 pm ] |
| Post subject: | Re: marine/outdoor carpet adhesive |
I'll never put carpet in a boat again!! If she says it's hard on the knees give her a life jacket or a rolled up towel!! /;-) |
|
| Author: | beavertonae-21 [ August 4th, 2015, 11:26 pm ] |
| Post subject: | Re: marine/outdoor carpet adhesive |
I know.... had a hard time putting it in the AE after the restoration wanted to go gel with silisand and a splash pattern , Maybe next time lol |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |