| HPBCANADA.COM http://www.hpbc.ca/ |
|
| 15" V4 OMC Short Shaft http://www.hpbc.ca/viewtopic.php?f=19&t=3860 |
Page 5 of 5 |
| Author: | Hevi Kevi [ December 28th, 2017, 1:20 pm ] |
| Post subject: | Re: 15" V4 OMC Short Shaft |
Are you looking to use a crossflow or loop charged v4? Does anyone know if the loop charged and xflow bolt up the same or do they have different tuner plates? Kevin |
|
| Author: | mercrazy [ December 28th, 2017, 1:30 pm ] |
| Post subject: | Re: 15" V4 OMC Short Shaft |
Hey Kevin Its a looper... i believe the bases are different but i have not proven that yet |
|
| Author: | Hevi Kevi [ December 28th, 2017, 2:06 pm ] |
| Post subject: | Re: 15" V4 OMC Short Shaft |
If you're interested in an adapter plate and want to drop off a powerhead, I'll measure it up and see if it can be done. If it can, then I'll make one. Maybe we can trade for something. I thought in the past this would be a cool project. Just didn't know if the nytro lower would hold up but using the bigger lower is an idea as well. It's pretty shitty for gear ratio though. |
|
| Author: | Hevi Kevi [ December 28th, 2017, 2:07 pm ] |
| Post subject: | Re: 15" V4 OMC Short Shaft |
That would sweet on a 15' Allison. |
|
| Author: | OMCFORME [ December 28th, 2017, 2:13 pm ] |
| Post subject: | Re: 15" V4 OMC Short Shaft |
The crossflow V4, 90 degree V4, and 60 degree V4 adapter plates are completely different. Matt |
|
| Author: | Hevi Kevi [ December 28th, 2017, 2:26 pm ] |
| Post subject: | Re: 15" V4 OMC Short Shaft |
OMCFORME wrote: The crossflow V4, 90 degree V4, and 60 degree V4 adapter plates are completely different. Matt Good to know. Were the latest ones a 90 degree v4 looper then and did they put out the most power? |
|
| Author: | mercrazy [ December 28th, 2017, 2:54 pm ] |
| Post subject: | Re: 15" V4 OMC Short Shaft |
Mine is a 1989 140hp Looper.... I will pull it apart after newyears some time and see how it looks. That might be a good plan if you think you can make one. I will let you know how it goes. I suspect that the bolt patern will land outside the stock stinger housing patern but a plate style tuner like Don mentioned similar to SST45 set up would work. Thanks Kevin |
|
| Page 5 of 5 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |