HPBCANADA.COM • View topic - **** Prop Slip Calculator ****

Just in case you rice lovers are scared to go on a Merc site :lol:

http://www.go-fast.com/Prop_Slip_Calculator.htm

Just in case you rice lovers are scared to go on a Merc site :lol:

http://www.go-fast.com/Prop_Slip_Calculator.htm

Good point...if you do use the merc one remember it'll only let you run the numbers once! If you press the back button to get to the HOME screen it never makes it....Luckly though it doesn't throw parts at you through the screen anymore...

i cant seem to get it to work,
prop 28 pitch
gear 1.87
rpm about 6200
speed 84,9

http://www.rbbi.com/folders/prop/propcalc.htm
I've been using this one, It does the job!

Author:	OneCycle [ February 1st, 2013, 11:50 am ]
Post subject:	** Prop Slip Calculator **
http://mercuryracing.com/propellers/pro ... ulator.php

Author:	LittleCharger [ February 1st, 2013, 12:11 pm ]
Post subject:	Re: ** Prop Slip Calculator **
Just in case you rice lovers are scared to go on a Merc site http://www.go-fast.com/Prop_Slip_Calculator.htm

Author:	DoktorC [ February 1st, 2013, 12:25 pm ]
Post subject:	Re: ** Prop Slip Calculator **
LittleCharger wrote: Just in case you rice lovers are scared to go on a Merc site http://www.go-fast.com/Prop_Slip_Calculator.htm Good point...if you do use the merc one remember it'll only let you run the numbers once! If you press the back button to get to the HOME screen it never makes it....Luckly though it doesn't throw parts at you through the screen anymore...

Author:	hcdcanada [ February 1st, 2013, 12:26 pm ]
Post subject:	Re: ** Prop Slip Calculator **
LittleCharger wrote: Just in case you rice lovers are scared to go on a Merc site http://www.go-fast.com/Prop_Slip_Calculator.htm i think merc is the only company that actually builds a race motor in china..... booh ya

Author:	3bilgepumps [ February 1st, 2013, 11:31 pm ]
Post subject:	Re: ** Prop Slip Calculator **
DoktorC wrote: Good point...if you do use the merc one remember it'll only let you run the numbers once! If you press the back button to get to the HOME screen it never makes it....Luckly though it doesn't throw parts at you through the screen anymore... Classic!!

HPBCANADA.COM http://www.hpbc.ca/

** Prop Slip Calculator ** http://www.hpbc.ca/viewtopic.php?f=19&t=912	Page 1 of 4

Author:	dubber [ February 2nd, 2013, 12:48 am ]
Post subject:	Re: ** Prop Slip Calculator **
If you have an iPhone / iPad do a search in the app store for "hering prop slip calculator" and you can have a neat little app for it.

Author:	hydroman316 [ February 2nd, 2013, 9:43 pm ]
Post subject:	Re: ** Prop Slip Calculator **
i cant seem to get it to work, prop 28 pitch gear 1.87 rpm about 6200 speed 84,9

Author:	OneCycle [ February 2nd, 2013, 9:46 pm ]
Post subject:	Re: ** Prop Slip Calculator **
hydroman316 wrote: i cant seem to get it to work, prop 28 pitch gear 1.87 rpm about 6200 speed 84,9 3% slip

Author:	SHIVERS [ February 3rd, 2013, 9:35 am ]
Post subject:	Re: ** Prop Slip Calculator **
http://www.rbbi.com/folders/prop/propcalc.htm I've been using this one, It does the job!

Author:	KAL Racing [ February 3rd, 2013, 10:30 am ]
Post subject:	Re: ** Prop Slip Calculator **
SHIVERS wrote: http://www.rbbi.com/folders/prop/propcalc.htm I've been using this one, It does the job! It does the job if you are running under 100mph

Page 1 of 4	All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com