It is currently April 29th, 2024, 7:00 pm

March Break

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 28 posts ]  Go to page 1, 2, 3  Next
Author Message
 PostPosted: March 18th, 2017, 6:08 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
Who did what??

I did nothing boat related but had some fun with the kids around the house...skating, GTing, snowmobiling etc..

Image

Image

Image

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: March 18th, 2017, 9:19 pm   
Team Member
User avatar

Joined: April 2nd, 2012, 7:35 pm
Posts: 406
Location: Barrie, On
I just put put in piles for my new boatport. The ice was still 16" thick - yet open water 150' out from shore. It will be 32' wide x 28' long - all 4 sides open like a big gazebo. 12' wide deck in the middle with a 10' wide slip on each side for the 2 marine railways. It was nice and warm today so I got the concrete poured in the piles. Everywhere we tried to dig rocks, BIG Rocks, and a 2 Really BIG Rocks.

Image

Image

Image

_________________
Triad V21 - 300xs
19' J-craft - 175 opti
18' Pontoon - 115 opti
12' tinny - 9.9 merc


Top
 Profile Send private message  
 PostPosted: March 18th, 2017, 10:00 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
That's a project! Digging up here is always a challenge.

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: March 19th, 2017, 12:22 am   
Team Member
User avatar

Joined: April 3rd, 2012, 5:09 pm
Posts: 1187
Location: Ontari-ari-ario
No more snow down our way or very little. Can't go on the lawn since it would be a muddy disaster. Lots of inside stuff with the kids. They eventually packed up and went to the grandparents with my wife so it was me all on my lonesome by the end of the week.

_________________
When you need more power try Binford tools.

Charger 18 DL, 2.6L Yamaha


Top
 Profile Send private message  
 PostPosted: March 19th, 2017, 4:53 pm   
Team Member

Joined: April 4th, 2012, 8:42 pm
Posts: 394
What lake is the boatport on?

March Break doesn't mean much to me. No kids, and it isn't a break in the US where I work. But I did do a drive to our cottage and looked at a boat.

I'd attach a picture, but I still get this message "Sorry, the board attachment quota has been reached" when I try to add a picture.


Top
 Profile Send private message  
 PostPosted: March 19th, 2017, 5:58 pm   
Team Member
User avatar

Joined: April 2nd, 2012, 7:35 pm
Posts: 406
Location: Barrie, On
David wrote:
What lake is the boatport on?


We are on a small lake between Burk's Falls and Parry Sound

_________________
Triad V21 - 300xs
19' J-craft - 175 opti
18' Pontoon - 115 opti
12' tinny - 9.9 merc


Top
 Profile Send private message  
 PostPosted: March 19th, 2017, 6:27 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
David wrote:
What lake is the boatport on?

March Break doesn't mean much to me. No kids, and it isn't a break in the US where I work. But I did do a drive to our cottage and looked at a boat.

I'd attach a picture, but I still get this message "Sorry, the board attachment quota has been reached" when I try to add a picture.


You've got to host the pics elsewhere. I use tinypic.com to host then you just cut and paste the IMG tag...and you can use it to post on any of the boards. It keeps the load off the server and membership cheap lol

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: March 19th, 2017, 6:47 pm   
Team Member
User avatar

Joined: July 13th, 2012, 6:57 pm
Posts: 521
Location: Little Britain, ON
I created shop space by selling the Race Bike and spares. Racing has eaten up more than it's fair share of my time these past 7 years. No regrets, now it's time to move back to "messing with boats". More fun, less expensive.
First up is a Sidewinder 14SS we dragged out of a field last fall, Adams first budget build. Stay tuned.

Doc, nice to see you made Family time, nice rink.

Doug, what can I say but wow, that's a big undertaking. Looking good though.
My shoreline aspirations are less adventurous... Level shore behind break wall, install a fire pit, Interlock the whole area.
Already have a concrete ramp and boat lift. Might need a new dock but that'll wait a year.

Course none of this will get done till I get healthy. Spent March Break indoors with the flu, no sooner does it leave than I get a cold. Been a tough month.


Top
 Profile Send private message  
 PostPosted: March 19th, 2017, 7:30 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
Tomcat wrote:
I created shop space by selling the Race Bike and spares. Racing has eaten up more than it's fair share of my time these past 7 years. No regrets, now it's time to move back to "messing with boats". More fun, less expensive.
First up is a Sidewinder 14SS we dragged out of a field last fall, Adams first budget build. Stay tuned.

Doc, nice to see you made Family time, nice rink.

Doug, what can I say but wow, that's a big undertaking. Looking good though.
My shoreline aspirations are less adventurous... Level shore behind break wall, install a fire pit, Interlock the whole area.
Already have a concrete ramp and boat lift. Might need a new dock but that'll wait a year.

Course none of this will get done till I get healthy. Spent March Break indoors with the flu, no sooner does it leave than I get a cold. Been a tough month.


We've all been sick...passing it around and around. By daughter ended up with pneumonia in February. The nice weather seems to have cured us all though.

Today we started with Rockets and spent the rest of the testing all the hills around the property for speed on a GT snowracer lol

Image

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: March 21st, 2017, 8:02 pm   
Team Member

Joined: April 4th, 2012, 8:42 pm
Posts: 394
I saved a pic from tinypic on my hard drive and tried to upload. Same error.


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 28 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010