HPBCANADA.COM

Ah Matt, good thing you have that 70hp on with the ski pylon fixtures.
In 2021 T's are pulling water skiers 5x around the track, like down undah mate: https://www.youtube.com/watch?v=G9NN_sTkBpk

Good plan, Erik. I like it. Put on a show, right?!!.. You work on that accent, I'll install the backwards facing seat.

I like those deep v Bullet outboard hulls.

That prop may work ok! Good dia and a 21P ......Is that boat a light build?

No, it is pretty heavy, RHD, factory bottom. Well, factory everything. It is a "ski-bar spec."
It is an excellent lake boat.

The 21P will help since the boat is on the heavy side. It will be interesting to here how it goes!

My 2.5 Merc power head is back together now so onto the next project.

I have a SST60 sleeved block here with 3 new pistons to go in it,install electrics, a HevyKevi tuner,cut head,Yamarude trim to cut and a nitro to put together. This will take a little longer than the 2.5 but I will stay busy!

Anyone else dug out a project to finish??

Mercrazy

What are the plans for that SST60? Do you have a boat for it?

Thats really only 2/3 of a nitro lol

Hey Matt
I picked up a 13' tunnel last fall because I couldn't find another Critchfield to build. I have a SST60 gear case housing to put some guts in for that boat. I have a couple of props left to try on it so we will see how it goes. I have to upgrade the steering in that boat because when I got it home I found out the steering drum under the dash was made out of wood!!

Mercrazy

Actually Andrew that's 2/4 to do!
Lol