HPBCANADA.COM
http://www.hpbc.ca/

Delta Rebuild
http://www.hpbc.ca/viewtopic.php?f=20&t=168		 Page 7 of 7
Author:  DoktorC [ January 22nd, 2020, 12:21 am ]
Post subject:  Re: Delta Rebuild
Streamin wrote:
My 2012 voodoo is built with 3/8 balsa core.
Fiberglass keel box. Balsa transom.
1/2 plywood floor full lenght.

Deck is composite sides and rear. And plywood dash.

Deck and hull are built very light.
There are two visible strips of kevlar in each back corner to prevent breaking the hull.

I almost didnt buy this boat because of how light and thin it is BUT its is very strong. I have beat the shit out of it on the race course and on the lake. It has been a blast to drive and I like it rough lol


Mine is build pretty much the same but with more material...not so light with the idea of it being a lake boat eventually.
Author:  LittleCharger [ January 22nd, 2020, 12:32 pm ]
Post subject:  Re: Delta Rebuild
DoktorC wrote:
Streamin wrote:
My 2012 voodoo is built with 3/8 balsa core.
Fiberglass keel box. Balsa transom.
1/2 plywood floor full lenght.

Deck is composite sides and rear. And plywood dash.

Deck and hull are built very light.
There are two visible strips of kevlar in each back corner to prevent breaking the hull.

I almost didnt buy this boat because of how light and thin it is BUT its is very strong. I have beat the shit out of it on the race course and on the lake. It has been a blast to drive and I like it rough lol


Mine is build pretty much the same but with more material...not so light with the idea of it being a lake boat eventually.


I just figured you got the regular lay up so you didn't have any issues with it sitting on the trailer for ever ! :lol:
Author:  DoktorC [ January 22nd, 2020, 12:57 pm ]
Post subject:  Re: Delta Rebuild
LittleCharger wrote:
DoktorC wrote:

Mine is build pretty much the same but with more material...not so light with the idea of it being a lake boat eventually.


I just figured you got the regular lay up so you didn't have any issues with it sitting on the trailer for ever ! :lol:


Hardy har har har...makes a luxurious squirrel house lol.
Author:  Streamin [ January 22nd, 2020, 4:27 pm ]
Post subject:  Re: Delta Rebuild
2020 is Ricks year to shine.
Knock the dust off the trailer weight and race.
Author:  Hounddog [ January 23rd, 2020, 9:20 am ]
Post subject:  Re: Delta Rebuild
There was a third VooDoo built at the same time....Mike Cory's
Mike's had a one off single seat deck and reworked bottom.
It was the quickest and fastest yamaha in T850.
Mike was going OMC.
It was a very light build as well.
Is the boat still in Ontario?
It would be a strong runner in either T750 or T850
Author:  DoktorC [ January 23rd, 2020, 9:36 am ]
Post subject:  Re: Delta Rebuild
Hounddog wrote:
There was a third VooDoo built at the same time....Mike Cory's
Mike's had a one off single seat deck and reworked bottom.
It was the quickest and fastest yamaha in T850.
Mike was going OMC.
It was a very light build as well.
Is the boat still in Ontario?
It would be a strong runner in either T750 or T850


Mike still owns it.
Author:  LittleCharger [ January 24th, 2020, 8:19 pm ]
Post subject:  Re: Delta Rebuild
Hounddog wrote:
There was a third VooDoo built at the same time....Mike Cory's
Mike's had a one off single seat deck and reworked bottom.
It was the quickest and fastest yamaha in T850.
Mike was going OMC.
It was a very light build as well.
Is the boat still in Ontario?
It would be a strong runner in either T750 or T850


Trying to get it back on the course maybe this year
Page 7 of 7 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com