HPBCANADA.COM http://www.hpbc.ca/ |
|
Custom 56ci Adapter Plate http://www.hpbc.ca/viewtopic.php?f=20&t=1689 |
Page 2 of 3 |
Author: | Hevi Kevi [ October 2nd, 2013, 1:38 pm ] |
Post subject: | Re: Custom 56ci Adapter Plate |
Thanks. It has a second set of holes so that you won't have to remove the powerhead bolts to take the wingplates on and off. Also, the thickness is the same as a stinger adapter plate so you don't loose driveshaft engagement like a normal 56 adapter plate. It has tapped holes on the front for the steering arm so no need to make up solid mounts either. For all I know, I could be wasting my time with it. In order to get the bolts out, I'm probably going to have to use socket head cap screws, and use a hex bit with a ball end to loosen and tighten the bolts as I'll need to get on them at a slight angle if using a tuner that has the same size at the end as an SST-60. I couldn't make the flange for the tuner any bigger, or it wouldn't fit out the bottom of the mid. Also, I've read there is so much vibration there that bolts will easily come loose. I'm hoping if I use lock washers and blue loctite every time that the bolts will hold. I've found that in this "Sport", you just have to try things for yourself and see what happens. If testing goes well and everything works as I want it to, I will make some of these to sell if there is any interest. |
Author: | Zonka [ October 4th, 2013, 2:11 pm ] |
Post subject: | Re: Custom 56ci Adapter Plate |
Hevi Kevi wrote: Thanks. It has a second set of holes so that you won't have to remove the powerhead bolts to take the wingplates on and off. Also, the thickness is the same as a stinger adapter plate so you don't loose driveshaft engagement like a normal 56 adapter plate. It has tapped holes on the front for the steering arm so no need to make up solid mounts either. Awesome additions, looks good |
Author: | BoomerMuskoka [ October 4th, 2013, 8:14 pm ] |
Post subject: | Re: Custom 56ci Adapter Plate |
that is just awesome work kevin, keep it up i hope it all come together and works ,,i think this stuff is really neat.. |
Author: | WalkWithMax [ February 11th, 2014, 10:44 am ] |
Post subject: | Re: Custom 56ci Adapter Plate |
That is so impressive Kevin!! Looking forward to the test results! Tuners are a bit of a controversial and unknown art. I'm sure there will be big demand in the states for these as well. Dave. |
Author: | Hevi Kevi [ February 11th, 2014, 1:17 pm ] |
Post subject: | Re: Custom 56ci Adapter Plate |
Thanks Dave. Performance will be the same as the SST-60 tuner unless someone requests a different shape as the tuner dimensions were made to SST-60 spec. I was worried about the bolts breaking or coming loose but after talking to Tim Krucz, he told me his only worry would be the welds on the tuner cracking over time and suggested that I get the annealed which I am going to. Also, I lost the pictures when I lost my blackberry on a snowmobile trail, but I made an internal O-ring groove for the water tube so it just slides into the adapter plate and seals around the outside of the water pipe. |
Author: | Hounddog [ February 12th, 2014, 10:01 am ] |
Post subject: | Re: Custom 56ci Adapter Plate |
Kevi, will we be able to bolt the original 49 cu. in. 15 inch inner exhaust cover to the base? If so you have your first order. |
Author: | Hevi Kevi [ February 12th, 2014, 1:37 pm ] |
Post subject: | Re: Custom 56ci Adapter Plate |
Hey Don, In order for that to work, a spacer would have to be made to go between the cover and the adapter plate and I don't even know if the cover would fit over that tuner or that there would be a place for the bolt holes so I'm going to have to say no. Why are you wanting to use the exhaust cover? Are you worried about noise or cooking the water pump, or is it top secret? lol |
Author: | Hounddog [ February 12th, 2014, 2:15 pm ] |
Post subject: | Re: Custom 56ci Adapter Plate |
Hevi Kevi wrote: Hey Don, In order for that to work, a spacer would have to be made to go between the cover and the adapter plate and I don't even know if the cover would fit over that tuner or that there would be a place for the bolt holes so I'm going to have to say no. Why are you wanting to use the exhaust cover? Are you worried about noise or cooking the water pump, or is it top secret? lol YES I am worried about the noise. On our lake it is better to have a normal sounding motor. They not not like the SST 60 sound. I really like your part. I would even use a different tuner. Give the cover a test fit and see if it is possible. |
Author: | Hevi Kevi [ February 12th, 2014, 3:41 pm ] |
Post subject: | Re: Custom 56ci Adapter Plate |
Once I have another one made up, I will check it out and see if it is possible. I no longer have the prototype here to check. |
Page 2 of 3 | All times are UTC - 5 hours [ DST ] |
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com |