It is currently April 27th, 2024, 8:34 am

New 300hp Etec

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
 PostPosted: July 28th, 2014, 8:32 pm   
Drag Racing Sponsor

Joined: October 30th, 2012, 12:14 am
Posts: 697
Location: Palmerston
Just looking around at the Evinrude site today and saw this. Quite a wild looking outboard

Image

_________________
Image
13' Rapid Craft 15" OMC 56
13' Critchfield 15" OMC 56
19' Laser 380 Ray (Future Project)


Top
 Profile Send private message  
 PostPosted: July 28th, 2014, 9:30 pm   
Team Member

Joined: April 3rd, 2012, 10:03 am
Posts: 813
Location: Gravenhurst, Ontario
Cool!!
Archer, rbt, Blake & I need to get these for our Newphie boats and start a new class.
Would they count as a capsule boat?


Top
 Profile Send private message  
 PostPosted: July 28th, 2014, 9:58 pm   
Member

Joined: July 26th, 2014, 10:25 am
Posts: 86
Location: Toronto, Ontario Canada
I read that they have power steering???


Top
 Profile Send private message  
 PostPosted: July 28th, 2014, 11:54 pm   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
Looks a LOT like a Rev XP............

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
 PostPosted: July 29th, 2014, 7:51 am   
Team Member

Joined: April 4th, 2012, 10:08 am
Posts: 626
Rock "Em Sock "Em Outboard!!

Looks very cool.

_________________
Specializing in custom marine performance product fabrication


Top
 Profile Send private message  
 PostPosted: July 29th, 2014, 8:21 am   
Member
User avatar

Joined: August 30th, 2012, 11:21 am
Posts: 325
It looks like the rechargeable battery off of my cordless drill. Looks like it has some "lower" water pick ups. Interesting looking prop nut. Right on about the Rev-XP part, clearly the same design team! A red one would look great hanging off the back of my Checkmate. Some specs would be nice, like actual dyno HP's and REAL weight, lower unit ratio, rev limit, and cost, for starters!


Top
 Profile Send private message  
 PostPosted: July 29th, 2014, 8:33 am   
Member
User avatar

Joined: August 30th, 2012, 11:21 am
Posts: 325
Looks like the specs are up. 558 lbs, 1:85 lower, 3.4 lt, comes in many colours! It will definitely need a better lower for performance use. :roll:


Top
 Profile Send private message  
 PostPosted: July 29th, 2014, 11:12 am   
Team Member
User avatar

Joined: April 4th, 2012, 2:04 pm
Posts: 879
Location: Mississauga
I heard they where working on a new lower with a beefed up carrier and shaft a while ago, maybe it will just need a cone. All a motor like this needs is a trip to the Dave Bush dyno room lol, too heavy for my ride though. Great for the larger hulls though good milage,lots of torque , and you just push a button at the end of the season and it winterizes itself :lol: would be nice to see some dyno numbers. It would also be nice to see omc brp offer a different lower ratio, even as an option.

_________________
1991 Hydrostream AE-21 2002 OMC modd


Top
 Profile Send private message  
 PostPosted: July 29th, 2014, 11:22 am   
Member
User avatar

Joined: August 30th, 2012, 11:21 am
Posts: 325
I don't think it would necessarily be too heavy for an AE21, I have seen V-8's hung off of them, and it sure wouldn't need as much set back!


Top
 Profile Send private message  
 PostPosted: July 29th, 2014, 11:43 am   
HPBC PRESIDENT
User avatar

Joined: March 31st, 2012, 5:53 pm
Posts: 3548
Location: Lapping lil charger
beavertonae-21 wrote:
I heard they where working on a new lower with a beefed up carrier and shaft a while ago, maybe it will just need a cone. All a motor like this needs is a trip to the Dave Bush dyno room lol, too heavy for my ride though. Great for the larger hulls though good milage,lots of torque , and you just push a button at the end of the season and it winterizes itself :lol: would be nice to see some dyno numbers. It would also be nice to see omc brp offer a different lower ratio, even as an option.


There's an easier option...with PROVEN performance....it also comes in black and doesn't have BRP's self destruct mode :mrgreen: ...BANG...knock,knock,knock.

_________________
08 SRV w/3.1 Hydro-tec Phase lll

I've got enough torque to tear a hole....in time...


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010