13 foot Allison COPY Race Boat preseason tune up
This hull is a 2014 built in the US.
YOUTUBE = https://youtu.be/m74sNxXdn9s
| HPBCANADA.COM http://www.hpbc.ca/ |
|
| Allison COPY Race Boat 13' http://www.hpbc.ca/viewtopic.php?f=21&t=2737 |
Page 1 of 3 |
| Author: | Ronny's Marine [ March 18th, 2015, 9:08 pm ] |
| Post subject: | Allison COPY Race Boat 13' |
13 foot Allison COPY Race Boat preseason tune up This hull is a 2014 built in the US. YOUTUBE = https://youtu.be/m74sNxXdn9s |
|
| Author: | LittleCharger [ March 19th, 2015, 6:45 am ] |
| Post subject: | Re: Allison COPY Race Boat 13' |
Should look nice when it is all done. Where the outside corners on the bottom that far out from being flat? |
|
| Author: | Hounddog [ March 19th, 2015, 10:57 am ] |
| Post subject: | Re: Allison COPY Race Boat 13' |
https://www.youtube.com/watch?v=m74sNxX ... e=youtu.be |
|
| Author: | Ronny's Marine [ March 23rd, 2015, 5:39 pm ] |
| Post subject: | Re: Allison COPY Race Boat 13' |
Here is part 2 on youtube = https://youtu.be/u4B94WHr3us |
|
| Author: | WalkWithMax [ March 23rd, 2015, 7:01 pm ] |
| Post subject: | Re: Allison COPY Race Boat 13' |
Okay, now that's awesome!! ... hope to see it at Waterford! 
|
|
| Author: | MGR [ March 23rd, 2015, 7:37 pm ] |
| Post subject: | Re: Allison COPY Race Boat 13' |
Thanks and all be there Also this is a more up to date vid [url][/url]https://youtu.be/u4B94WHr3us |
|
| Author: | MGR [ March 23rd, 2015, 7:38 pm ] |
| Post subject: | Re: Allison COPY Race Boat 13' |
Sorry same vid as above |
|
| Author: | Ronny's Marine [ March 24th, 2015, 7:57 pm ] |
| Post subject: | Re: Allison COPY Race Boat 13' |
Youtube Vid = https://youtu.be/u4B94WHr3us |
|
| Author: | daveee [ March 27th, 2015, 12:44 pm ] | ||
| Post subject: | Re: Allison COPY Race Boat 13' | ||
You're doing a Beautiful job. Some ideas I developed rigging mine you might be interested in.
|
|||
| Author: | MGR [ March 27th, 2015, 1:17 pm ] |
| Post subject: | Re: Allison COPY Race Boat 13' |
Do you have any pics of how you mounted the pullies under the dash I really like the way you ran the cables inside |
|
| Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
| © 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com | |