HPBCANADA.COM http://www.hpbc.ca/ |
|
Any boaters with a drag car problem too . . . ? http://www.hpbc.ca/viewtopic.php?f=25&t=656 |
Page 4 of 6 |
Author: | Bill P [ April 25th, 2014, 11:32 pm ] |
Post subject: | Re: Any boaters with a drag car problem too . . . ? |
Looks cool, bet it sounds better. Still running the R8, can't imagine getting something I'd enjoy more. Picking up a charger STV with a 300x on it in a month or so. It's getting cleaned up first. |
Author: | Jeff Yammer [ August 5th, 2014, 4:56 pm ] |
Post subject: | Re: Any boaters with a drag car problem too . . . ? |
I am running a 408" SBF 700ish at 7100rpm all motor. Now I've switched things up a bit and have added a I.S. nitrous plate capable of pushing 600hp of nitrous although I'll be pushing a consistent 250-350 shot only. Should run an easy 8.60 give or take. What's your motor and drivetrain plans |
Author: | Carson [ August 16th, 2014, 10:42 pm ] |
Post subject: | Re: Any boaters with a drag car problem too . . . ? |
Ill be running a sbf 331, short filled block, afr 205 heads. Were aiming for 500 at the wheels, engine will be turning around 8700 rpm. In the process of building a face plated t-5, should be interesting the first few times out. Just need all my rear suspension stuff and rim/ tires and i should have everything to finish the car. |
Author: | Jeff Yammer [ August 18th, 2014, 9:09 pm ] |
Post subject: | Re: Any boaters with a drag car problem too . . . ? |
What's the power adder for your 500 rwhp ? What rear suspension you planning ? T5 down the strip huh .... what's your E.T goals ? Sounds like a great build man. |
Author: | Carson [ August 19th, 2014, 3:36 pm ] |
Post subject: | Re: Any boaters with a drag car problem too . . . ? |
Thinking on going with something like the team z street beast with heim joints and an anti roll bar. Plan on a 27-10.5 tire. As for the motor were aiming to make that power all motor, no power adder |
Author: | Jeff Yammer [ August 20th, 2014, 12:07 pm ] |
Post subject: | Re: Any boaters with a drag car problem too . . . ? |
What ET are you looking to shoot for. ? Heads , cam spec , intake and carb ? That's a stout motor Mini tub or no ? |
Author: | Carson [ August 21st, 2014, 1:54 pm ] |
Post subject: | Re: Any boaters with a drag car problem too . . . ? |
Im aiming for mid 10's, if anything i wanna beat the kid with the 460hp skyline in barrie haha. Heads will be afr 205's with some porting. Cam will be a custom grind once the final flow numbers are in on the heads. Intake will be an edelbrock super victor Carb mostlikely will be an a.e.d 950 Gonna try and squeez a 27-10.50 in the stock wheel tubs with some trimming of the fender lip. Already have my fuel system in, stock tank with a sump welded in the rear, holley pro 150 billet fuel pump. Should be a fun ride when done. |
Author: | Jeff Yammer [ August 21st, 2014, 3:05 pm ] |
Post subject: | Re: Any boaters with a drag car problem too . . . ? |
Gonna be a big big cam for 700+ crankshaft HP. Mid 10's consistently are a little tougher manwell style but can be done for sure. I run 28-10.5" MT no problem on my non mini rubbed car. |
Author: | Carson [ August 21st, 2014, 3:36 pm ] |
Post subject: | Re: Any boaters with a drag car problem too . . . ? |
What size of rim 7"? |
Page 4 of 6 | All times are UTC - 5 hours [ DST ] |
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com |