It is currently March 28th, 2024, 5:04 pm

T750/850 OMC parts

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 8 posts ] 
Author Message
 PostPosted: October 26th, 2014, 4:08 pm   
Member

Joined: September 7th, 2013, 10:16 pm
Posts: 23
I have a ton of OMC 75 parts I need to part with
3 heads,
2 cab sets,
2 cowlings
2pans
1 starter
front crank case
2 water jackets exhaust covers
6 reed blocks with stock reeds
electrical parts,
wiring harness
gaskets
1 fuel pump
motor mounts
3 air boxes
boxes of bolts and hardware
pistons 9 with rods some are scored
lower pan with wing plate cut outs
solenoids



I am asking $650 for the lot. I would rather sell all together to keep it simple


I will be doing an inventory this week and take a few photos as well
Mike


Last edited by visa 88 on November 4th, 2014, 9:50 pm, edited 1 time in total.

Top
 Profile Send private message  
 PostPosted: October 27th, 2014, 1:38 pm   
Member

Joined: April 21st, 2014, 9:59 am
Posts: 185
DO you have a smooth side cowl?


Top
 Profile Send private message  
 PostPosted: October 27th, 2014, 6:42 pm   
Member

Joined: September 7th, 2013, 10:16 pm
Posts: 23
Yes I do have one without the raised lettering if that's what your looking for I could send you a photo if you want



ote="voo-doo_child"]DO you have a smooth side cowl?[/quote]


Top
 Profile Send private message  
 PostPosted: October 16th, 2016, 12:46 pm   
Member

Joined: September 7th, 2013, 10:16 pm
Posts: 23
looking to get rid of all my boating equipment
need this gone
also have complete sst 90
sst90 motor
spare ph
parts
and props see my other add
thanks


Top
 Profile Send private message  
 PostPosted: November 23rd, 2016, 2:39 pm   
Member

Joined: April 21st, 2014, 9:59 am
Posts: 185
[quote="visa 88"]Yes I do have one without the raised lettering if that's what your looking for I could send you a photo if you want


Not quite, i am looking for one that smooth all the way from bottom to top, no step down for the last 3 inches of the top, hard to explain...

I am also interested in the lower pan with cut outs, potentially the fuel pump, wiring harness, starter and gaskets.

Do you have a set of controls?


Top
 Profile Send private message  
 PostPosted: November 24th, 2016, 2:36 pm   
Member

Joined: August 25th, 2014, 1:56 pm
Posts: 27
I have a pile of 49 stuff as well
Cranks to electronics
Let me know what you need


Top
 Profile Send private message  
 PostPosted: December 13th, 2016, 11:49 am   
Drag Racing Sponsor

Joined: October 30th, 2012, 12:14 am
Posts: 695
Location: Palmerston
voo-doo_child wrote:
visa 88 wrote:
Yes I do have one without the raised lettering if that's what your looking for I could send you a photo if you want


Not quite, i am looking for one that smooth all the way from bottom to top, no step down for the last 3 inches of the top, hard to explain...

I am also interested in the lower pan with cut outs, potentially the fuel pump, wiring harness, starter and gaskets.

Do you have a set of controls?


Did you find the hood you were looking for? I think you're talking about the early Johnson hoods before they started using the same stepped style as the Evinrude ones. I have a few here if you need.

Kevin

_________________
Image
13' Rapid Craft 15" OMC 56
13' Critchfield 15" OMC 56
19' Laser 380 Ray (Future Project)


Top
 Profile Send private message  
 PostPosted: January 12th, 2017, 10:51 am   
Member

Joined: April 21st, 2014, 9:59 am
Posts: 185
Hevi Kevi wrote:
voo-doo_child wrote:
visa 88 wrote:
Yes I do have one without the raised lettering if that's what your looking for I could send you a photo if you want


Not quite, i am looking for one that smooth all the way from bottom to top, no step down for the last 3 inches of the top, hard to explain...

I am also interested in the lower pan with cut outs, potentially the fuel pump, wiring harness, starter and gaskets.

Do you have a set of controls?


Did you find the hood you were looking for? I think you're talking about the early Johnson hoods before they started using the same stepped style as the Evinrude ones. I have a few here if you need.

Kevin


No I haven't found one, this is exactly what i am looking for.


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010