HPBCANADA.COM
http://www.hpbc.ca/

27 SRX for sale
http://www.hpbc.ca/viewtopic.php?f=29&t=2658
Page 1 of 1

Author:  mistah_max [ January 23rd, 2015, 2:19 pm ]
Post subject:  27 SRX for sale

omc 27 srx for sale. I was done by DAH last winter. I ran it with when I had my bridgeport on my charger STV but since I went with a promax this prop is too small for top end runs. I already have another overall cruising prop so I dont need this one.

I dont know how but a ding occured on my last run with it and I'm pretty pist about it. i'm shure DAH or anybody else could fix this no problem. a small imperfection on another blade to. I didnt notice any change in performance or vibration after the damage occured. see pics.
asking 300$ shipped. would consider a trade for a 30pitch A5 chopper ( the odd one with the smaller blade) of a 30pitch mazco chopper.

Image

Image

Image

Image

Image

Image

Author:  Northbase [ January 23rd, 2015, 8:00 pm ]
Post subject:  Re: 27 SRX for sale

I don't have a 27 srx and I think I've got 2 30" choppers.
A trade perhaps??

Author:  mistah_max [ January 26th, 2015, 2:59 pm ]
Post subject:  Re: 27 SRX for sale

Northbase wrote:
I don't have a 27 srx and I think I've got 2 30" choppers.
A trade perhaps??


shure I dont mind a trade

what model choppers?? like I said I'd like the one with the odd diameter blade. the one i'm looking for has a 14,25dia and 4.5" blade. they came in a4 and a5 models from what I read. I tired one last year and worked good. I'm not interrested in a chopper 2 at this time.

Author:  BoomerMuskoka [ January 26th, 2015, 6:38 pm ]
Post subject:  Re: 27 SRX for sale

i believe your looking for a small ear chopper ^

Author:  mistah_max [ January 26th, 2015, 9:30 pm ]
Post subject:  Re: 27 SRX for sale

BoomerMuskoka wrote:
i believe your looking for a small ear chopper ^


yes I am but its my understanding that a chopper 2 (small ear) has a bigger diameter as well as bigger ears. I read the 30 chopper a4 or a5 has a odd diameter and blade width. or maybe I hae this wrong??

Author:  J.Kimmerly [ February 5th, 2015, 1:12 am ]
Post subject:  Re: 27 SRX for sale

How do these props run for bow lift, somewhere between an ET and a Chopper? What did DAH do to it just clean it up?

Author:  mistah_max [ February 5th, 2015, 2:18 pm ]
Post subject:  Re: 27 SRX for sale

good bow lift and the bridgeport liked the smaller diameter. slip was around 8% witch is good.

as for DAH, the original guy who worked at omc and helped (or did) design this prop works at DAH. he's the guy that you want to go see with this prop. I just told him what I had and what I wanted the prop to do an he worked his magic on it. he did more then celan it up but what exactly I couldnt tell you. this was my best prop until I switched to my promax. the revs are just not there like the BP.

Author:  J.Kimmerly [ February 5th, 2015, 4:29 pm ]
Post subject:  Re: 27 SRX for sale

PM sent

Author:  mistah_max [ February 10th, 2015, 4:09 pm ]
Post subject:  Re: 27 SRX for sale

SOLD

Page 1 of 1 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com