HPBCANADA.COM
http://www.hpbc.ca/

WTB: Prop-> Yamaha/Merc 13 spline. Merc Cleaver 13 spline
http://www.hpbc.ca/viewtopic.php?f=36&t=3643		 Page 1 of 1
Author:  mattmak [ March 26th, 2017, 4:26 pm ]
Post subject:  WTB: Prop-> Yamaha/Merc 13 spline. Merc Cleaver 13 spline
Looking for something in the range of 12x18, 11.5x20, possibly larger up to 12x20. This is for a Yamaha 70 with a small gearcase on a Voodoo in factory form. Merc Cleavers, for example.

Also looking for the smaller end of this range for a Yamaha Pro50 3cyl..

thanks,
M
Author:  Tomcat [ March 26th, 2017, 9:42 pm ]
Post subject:  Re: WTB: Prop-> Yamaha/Merc 13 spline. Merc Cleaver 13 splin
Contact Todd at http://hydromotive.com
Author:  Hounddog [ March 27th, 2017, 6:05 am ]
Post subject:  Re: WTB: Prop-> Yamaha/Merc 13 spline. Merc Cleaver 13 splin
I have all of those sizes. In fact I have everything from 17 to 25 pitch. Other T guys have shown interest in testing props. I could meet all of you at Gull Lake in Gravenhurst on a weekend and have a test day.
Author:  mattmak [ March 27th, 2017, 9:16 am ]
Post subject:  Re: WTB: Prop-> Yamaha/Merc 13 spline. Merc Cleaver 13 splin
I'm in for a test day.

But I am looking to acquire something, or maybe have mine worked.
Author:  cmn [ October 22nd, 2017, 5:20 am ]
Post subject:  Re: WTB: Prop-> Yamaha/Merc 13 spline. Merc Cleaver 13 splin
hello, still looking for?
I have a new TE cleaver 12x18 for sale
regards
jm
Author:  tsrt [ November 10th, 2017, 6:35 am ]
Post subject:  Re: WTB: Prop-> Yamaha/Merc 13 spline. Merc Cleaver 13 splin
Winrace racing propeller, pricey but worth buying :http://www.winracepropellers.no/
Author:  Tom Schnull [ November 10th, 2017, 10:00 pm ]
Post subject:  Re: WTB: Prop-> Yamaha/Merc 13 spline. Merc Cleaver 13 splin
Matt, I just ran, for the first time, a Ron Hill 11 5/8" x 20 pitch 4 blade. On my heavy Rapid Craft, solid 57 mph, barely 58, at 6150-6200 rpm [1.83 gearing which is different than yours, that may be an issue]. Key is much better out of the hole, so hopefully improved mid range acceleration as well for our shorter courses. We shall see! You're welcome to try it out next spring, at a race or at the cottage near Parry Sound. Ron Hill also offers a 22 pitch version, and up to 12" diameter. US$300 or so, plus $50 shipping and GST.
Author:  mattmak [ November 10th, 2017, 10:55 pm ]
Post subject:  Re: WTB: Prop-> Yamaha/Merc 13 spline. Merc Cleaver 13 splin
Tom, nice! the report is much appreciated.
but what do you mean you *just* ran? today, in this stupid weather? Lol.
Author:  Hounddog [ November 11th, 2017, 12:23 am ]
Post subject:  Re: WTB: Prop-> Yamaha/Merc 13 spline. Merc Cleaver 13 splin
Tom check that prop with a pitch gauge. It may not be 20 pitch. I could be less. When you ran my 18 pitch you hit the rev limiter. Based on that info I thought the ideal race prop would be a 20 or 21 pitch and getting you 60 mph.. I believe Matt has both 1:84 and 1:71 lower units. Matt did you find a Delta?
Author:  mattmak [ November 11th, 2017, 10:10 am ]
Post subject:  Re: WTB: Prop-> Yamaha/Merc 13 spline. Merc Cleaver 13 splin
Tom, Don is right: it is possible the average pitch is not what you expect. I have a Ron Hill Signature Semi-Cleaver "12x19" that measured 12.25x20. Once I started using the 20 itch in my prop slip calcs, the results made more sense. That 12x19 has since been to Kawartha and I was told each blade was different, with one blade off by a larger amount (both pitch and diam) than the others.

Yes, I have 1.71:1 and 2.0:1 lowers. I had been using the 2.0:1 gears with 20/19 pitch props this past season.

BTW, I am interested in props around 11x18 to 12.5x21, but no longer in desperate need. I have a couple to use next year. The focus now is the hull. Tom, I have a couple props for you to try too if you wish. Both are 19" pitch.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com