HPBCANADA.COM • View topic - OUR ONTARIO DRAG PEOPLE LIKED THE 3 CYLINDER CLASS AT JASPER

Hevi Kevi wrote:

Out of curiosity, did the club settle on the above rules for 3 cylinder drag?

From the OPBRA rule book, 2019

TRIPLES CLASS
RULESRULE 10 • TRIPLES CLASS
1. Age requirement 16 minimum
2. Follow General/Competition Regulations - Drag classes and Safety
3. Approved hulls are Flat, V bottom and Tunnel. Hydro or Outrigger hulls not
permitted
4. Post-race minimum weight, based on cubic inch:
a) 42 to 44.9 c.i. 780 lbs
b) 45 to 62.9 c.i. 800 lbs
c) 63 to 86 c.i. 880 lbs
(includes boat/motor/propeller, running gear, driver, helmet, life jacket, etc.)
5. Motors:
a. 3-cylinder engine only to maximum 86 cubic inch. (Must have been a
production available engine prior to modifications, 60SST permitted)
b. No tiller style steering
c. No power adders (NOS, Turbo, Superchargers, etc..)
d. Ignition timing computers, controllers or like, permitted
e. Gearcase must be shiftable from Drivers seat.
f. Low water pickup, nose cone permitted
g. Any midsection and trim permitted
h. 24V systems permitted
i. Trim computers mandatory with 24V trim. (Must be outboard purpose-
built approved by Safety/Tech with 12V control circuit.)
j. Any Gasoline permitted (No Alcohol, Nitromethane, etc.)

Author:	Murph [ January 8th, 2019, 8:57 pm ]
Post subject:	Re: OUR ONTARIO DRAG PEOPLE LIKED THE 3 CYLINDER CLASS AT JA
Hounddog wrote: Have our 2018 3 cylinder class drag rules been approved? I noticed the 2018 American rules are now posted. thanks Got a link for the rules?

Author:	Hounddog [ January 8th, 2019, 11:03 pm ]
Post subject:	Re: OUR ONTARIO DRAG PEOPLE LIKED THE 3 CYLINDER CLASS AT JA
2018 Class Rules 3-Cylinder Outlaw Entry Level racing for Lake Boats at a minimal cost 1) Hulls will be limited to Flat, V Bottom and Tunnel. No Hydro or Outrigger style hulls 2) Boat must meet all DSRA safety regulations. Battery and fuel tank secured (bolted, strapped) Lifejacket with leg straps (lifeline or equv. ect.) Working fire extinguisher within reach of driver. Driver must be seat and steering wheels only. No tillers. Hulls must have means of strapping for weighing. 3) Any Fuel- No Alcohol, No Additives, No Nitro Methane. 4) Timing computers, controllers allowed 5) No power adders. (NOS, turbo, blower, etc.…) 6) 3 Cylinder engines only and limited to 86ci. Must have been production fishing outboard before modifications. (60SST OMC allowed) Lower unit must be of the shift able type and may have low water pickup attached. Mismatching of brands between powerhead and lower unit allowed. Any midsection and trim allowed. 3-Cylinder Outlaw All weights subject to review at any time Weights will be determined by Cube Inch ➢ 42ci-44ci 700lbs ➢ 45ci-62ci 800lbs ➢ 63ci-86ci 880lbs

Author:	idvette [ January 9th, 2019, 7:50 am ]
Post subject:	Re: OUR ONTARIO DRAG PEOPLE LIKED THE 3 CYLINDER CLASS AT JA
These are basically the rules we are working off, but as Craig said we haven't finalized our class rules yet. Stay tuned!

Author:	Hounddog [ January 9th, 2019, 11:06 am ]
Post subject:	Re: OUR ONTARIO DRAG PEOPLE LIKED THE 3 CYLINDER CLASS AT JA
I like the 42 to 44 cubic inch class There are many successful MODS for the 40-50 hp Yamahas Here is a thread that covers the YAMAHA mods. http://www.boatracingfacts.com/forums/s ... ded-Yamaha Don't forget you can use parts from other models and/or other engine makes in your build. You can be very creative in your build. http://www.boatracingfacts.com/forums/a ... 1162497069 I also have one of these hulls to go with the motor. https://static.wixstatic.com/media/faa9 ... 2f~mv2.jpg

Author:	Hevi Kevi [ December 23rd, 2019, 1:50 pm ]
Post subject:	Re: OUR ONTARIO DRAG PEOPLE LIKED THE 3 CYLINDER CLASS AT JA
Out of curiosity, did the club settle on the above rules for 3 cylinder drag?

HPBCANADA.COM http://www.hpbc.ca/

OUR ONTARIO DRAG PEOPLE LIKED THE 3 CYLINDER CLASS AT JASPER http://www.hpbc.ca/viewtopic.php?f=51&t=4076	Page 3 of 3

Author:	idvette [ December 23rd, 2019, 2:01 pm ]
Post subject:	Re: OUR ONTARIO DRAG PEOPLE LIKED THE 3 CYLINDER CLASS AT JA
Hevi Kevi wrote: Out of curiosity, did the club settle on the above rules for 3 cylinder drag? From the OPBRA rule book, 2019 TRIPLES CLASS RULESRULE 10 • TRIPLES CLASS 1. Age requirement 16 minimum 2. Follow General/Competition Regulations - Drag classes and Safety 3. Approved hulls are Flat, V bottom and Tunnel. Hydro or Outrigger hulls not permitted 4. Post-race minimum weight, based on cubic inch: a) 42 to 44.9 c.i. 780 lbs b) 45 to 62.9 c.i. 800 lbs c) 63 to 86 c.i. 880 lbs (includes boat/motor/propeller, running gear, driver, helmet, life jacket, etc.) 5. Motors: a. 3-cylinder engine only to maximum 86 cubic inch. (Must have been a production available engine prior to modifications, 60SST permitted) b. No tiller style steering c. No power adders (NOS, Turbo, Superchargers, etc..) d. Ignition timing computers, controllers or like, permitted e. Gearcase must be shiftable from Drivers seat. f. Low water pickup, nose cone permitted g. Any midsection and trim permitted h. 24V systems permitted i. Trim computers mandatory with 24V trim. (Must be outboard purpose- built approved by Safety/Tech with 12V control circuit.) j. Any Gasoline permitted (No Alcohol, Nitromethane, etc.)

Author:	Hevi Kevi [ December 23rd, 2019, 3:35 pm ]
Post subject:	Re: OUR ONTARIO DRAG PEOPLE LIKED THE 3 CYLINDER CLASS AT JA
idvette wrote: Hevi Kevi wrote: Out of curiosity, did the club settle on the above rules for 3 cylinder drag? From the OPBRA rule book, 2019 TRIPLES CLASS RULESRULE 10 • TRIPLES CLASS 1. Age requirement 16 minimum 2. Follow General/Competition Regulations - Drag classes and Safety 3. Approved hulls are Flat, V bottom and Tunnel. Hydro or Outrigger hulls not permitted 4. Post-race minimum weight, based on cubic inch: a) 42 to 44.9 c.i. 780 lbs b) 45 to 62.9 c.i. 800 lbs c) 63 to 86 c.i. 880 lbs (includes boat/motor/propeller, running gear, driver, helmet, life jacket, etc.) 5. Motors: a. 3-cylinder engine only to maximum 86 cubic inch. (Must have been a production available engine prior to modifications, 60SST permitted) b. No tiller style steering c. No power adders (NOS, Turbo, Superchargers, etc..) d. Ignition timing computers, controllers or like, permitted e. Gearcase must be shiftable from Drivers seat. f. Low water pickup, nose cone permitted g. Any midsection and trim permitted h. 24V systems permitted i. Trim computers mandatory with 24V trim. (Must be outboard purpose- built approved by Safety/Tech with 12V control circuit.) j. Any Gasoline permitted (No Alcohol, Nitromethane, etc.) Thanks

Author:	Hounddog [ December 23rd, 2019, 4:39 pm ]
Post subject:	Re: OUR ONTARIO DRAG PEOPLE LIKED THE 3 CYLINDER CLASS AT JA
Hevi Kevi wrote: Out of curiosity, did the club settle on the above rules for 3 cylinder drag? YES! http://opbra.ca/wp-content/uploads/2019 ... Feb-20.pdf • TRIPLES CLASS 1. Age requirement 16 minimum 2. Follow General/Competition Regulations - Drag classes and Safety 3. Approved hulls are Flat, V bottom and Tunnel. Hydro or Outrigger hulls not permitted 4. Post-race minimum weight, based on cubic inch: a) 42 to 44.9 c.i. 780 lbs b) 45 to 62.9 c.i. 800 lbs c) 63 to 86 c.i. 880 lbs (includes boat/motor/propeller, running gear, driver, helmet, life jacket, etc.) 5. Motors: a. 3-cylinder engine only to maximum 86 cubic inch. (Must have been a production available engine prior to modifications, 60SST permitted) b. No tiller style steering c. No power adders (NOS, Turbo, Superchargers, etc..) d. Ignition timing computers, controllers or like, permitted e. Gearcase must be shiftable from Drivers seat. f. Low water pickup, nose cone permitted g. Any midsection and trim permitted h. 24V systems permitted i. Trim computers mandatory with 24V trim. (Must be outboard purposebuilt approved by Safety/Tech with 12V control circuit.) j. Any Gasoline permitted (No Alcohol, Nitromethane, etc.)

Page 3 of 3	All times are UTC - 5 hours [ DST ]
© 2000, 2002, 2005, 2007 phpBB Group • http://www.phpbb.com