It is currently April 27th, 2024, 6:47 pm

T BOAT SPEEDS AS TOLD TO ME BY OWNERS OR ACTUAL GPS SPEED

View active topics

All times are UTC - 5 hours [ DST ]


Post new topic Reply to topic  [ 50 posts ]  Go to page Previous  1, 2, 3, 4, 5
Author Message
 PostPosted: March 7th, 2019, 10:06 am   
Team Member

Joined: May 3rd, 2012, 8:25 pm
Posts: 210
I really like my Jeff Brown cleaver. I wish our money exchange wasn't so high, I would buy another one to have the slowest one reworked. Mine is a 12.5x22" and at 68 MPH, I'm only turning 6100 RPM with a nitro gearcase. The math don't add up. So I know their is a lot more in it but not willing to mess with this one till I get another one.
Mike


Top
 Profile Send private message  
 PostPosted: March 7th, 2019, 10:51 pm   
Member

Joined: September 24th, 2012, 7:46 pm
Posts: 355
Location: Lake simcoe
Hounddog wrote:
13Checkmate wrote:
The one I bought from Ron hill works pretty good. Im over 70mph with an out of the box 12 1/2" × 24p cleaver. Ive been wanting to get it worked but there is a ton more engine setup to be done first


That is interesting. Most run 23 pitch. Last year some top T750 OMC guys were looking to try 24 pitch. What boat/motor combo is it on and what rpm are you getting.
thanks for the input
Don

This is with our delta/sst 60 combo. The tach isnt great but usually see in around 65-6600rpm. The ron hill 12 1/2" × 24p is ever so slightly slower than a true 12×23 omc cleaver. A banged up omc cleaver got me over 72mph on a few passes vs the ron hill stock at 70-71.5mph consistantly


Top
 Profile Send private message  
 PostPosted: March 15th, 2019, 8:20 am   
Member
User avatar

Joined: July 26th, 2015, 3:49 pm
Posts: 45
Location: Scotland
I did have a different exhaust tuner on for my record runs, and also my port blending was over the allowed 10mm so the motor was not legal. It was an old race block which had been played around with previously, and if anything the port blending made the motor perform worse as it was almost a right angle.
But this year I have a new block, new tuner to standard spec but still billet, everything will be within UIM spec. Apart from of course the cowling and pull start, which are from a 60hp Enduro.
For the record classes this year I may have to run 3up to meet the minimum weight requirements for PF850, so obviously will be slower. But I will do runs 2up as well just to see what she can do.

On another note, there is a substantial amount of power to be gained by running on very cold days, I know Rolf set his record on a cold day in Norway, the engine produces a lot more power. I hope to do some testing in below 0 air temps too


Top
 Profile Send private message  
 PostPosted: May 13th, 2019, 4:26 pm   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3027
Hounddog wrote:
Just to add to my collection I got one of the 4 blade 12 1/2 x 18 Ron Hill props.
https://www.ebay.ca/itm/13-Spline-Signa ... kL&vxp=mtr


WOW!....A fellow T boat guy just informed me that the price of this prop has gone up a lot since I got one earlier this year. NOW $600.00 canadian. Simple case of supply and demand.


Top
 Profile Send private message  
 PostPosted: September 21st, 2019, 1:45 pm   
Member

Joined: September 24th, 2012, 7:46 pm
Posts: 355
Location: Lake simcoe
New personal best in the delta this morning. 73.3mph


Top
 Profile Send private message  
 PostPosted: March 9th, 2023, 11:47 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3027
It would be interesting to see some current speeds and the boat and motor combinations. We should see some mod 90 Yamaha T boat speeds running over 80 mph and mod 56 oval ports running 80 mph. Tom had the only T boat running a 60 hp mercury 4 stroke ....it ran 64 mph. The Gordon delta should be testing this summer running a 60 4 stroke. There is also a couple of people trying 40 hp 2 cylinder motors. I would expect them to run 45 to 50 mph and be a fun and safe ride for kids 14 and under. Perry had one S750 (S means tunnel), he now runs an SST 45 engine. The other S750 is now switching to 56 omc power so it will be the first time that combination is run. There are still a couple of Mod VP T boats in Ontario but I haven’t heard about their speeds.


Top
 Profile Send private message  
 PostPosted: March 19th, 2023, 11:58 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3027
I received a message yesterday and I was going to hold off posting the speeds until I got additional speeds for other T guys. When I did some history research it is a record performance.
The Gordon family on 6 mile has many performance boats....including a critchfield, a delta and a 13 foot checkmate. They spend a lot of time testing powerheads and props last summer. They mainly focused on the critchfield. They found speeds in the 70 to 73 mile range until they tested their last powerhead. The powerheads were all 56 Bridgeport. They improved from 73 mph gps reading to 77 mph with that powerhead change. That is impressive!
Now comes the interesting part.....they took that motor and mounted it on their delta. Same motor, same prop......76 mph on gps!! That has to be a record for a delta!!


Top
 Profile Send private message  
 PostPosted: March 20th, 2023, 9:31 am   
Team Member
User avatar

Joined: April 1st, 2012, 12:29 am
Posts: 1444
Hounddog wrote:
I received a message yesterday and I was going to hold off posting the speeds until I got additional speeds for other T guys. When I did some history research it is a record performance.
The Gordon family on 6 mile has many performance boats....including a critchfield, a delta and a 13 foot checkmate. They spend a lot of time testing powerheads and props last summer. They mainly focused on the critchfield. They found speeds in the 70 to 73 mile range until they tested their last powerhead. The powerheads were all 56 Bridgeport. They improved from 73 mph gps reading to 77 mph with that powerhead change. That is impressive!
Now comes the interesting part.....they took that motor and mounted it on their delta. Same motor, same prop......76 mph on gps!! That has to be a record for a delta!!


Bridgeport powa...that is impressive speed in a delta there had to be some pucker factor during that ride :lol:

_________________
Bullet 20 cc Super Comp
Delta with a slow 56
Jcraft with a ProV 150


Top
 Profile Send private message  
 PostPosted: March 24th, 2023, 10:01 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3027
Well there was a different combo come up for sale on Kijiji Ontario this past week. I haven’t heard of anyone with this combo before. It’s a delta with a 90 hp mercury inline 6 cylinder long shaft! Seller says in runs 60 to 65 mph. Wonder how fast a delta would run with a mercury 1500XS?


Top
 Profile Send private message  
 PostPosted: September 14th, 2023, 7:41 am   
Team Member
User avatar

Joined: April 3rd, 2012, 1:52 pm
Posts: 3027
Hounddog wrote:
I am not going to show the names, but, I will show the boat, the motor and if it was a GPS read
These are since T started.....no EP's in the list
FROM SLOWEST TO FASTEST MPH
T750
- VOODOO......50 hp OMC............42
- VOODOO......60 hp OMC............49
- VOODOO......60 hp OMC............52...GPS
- DELTA..........50 hp YAM.............52...GPS
- VOODOO......55 hp YAM.............54...GPS
- DELTA........55 hp YAM.............55...GPS
- CRITCH........60 hp OMC............55
- OASIS.........50 hp TOH.............57 ...GPS
- DELTA..........60 hp OMC............58....GPS
- ALLISON.......60 hp MERC...........59....GPS
- DELTA..........60 hp OMC.............60....GPS
- DELTA..........60 hp MERC...........61.....GPS
- ALLISON.......60 hp OMC............62....GPS
- CRITCH.........60 hp OMC...........62....GPS
- RAPID C........60 hp MERC.........63 ...GPS

T850
- VOODOO.......70 hp OMC.........53...5 of them
- VOODOO........70 hp YAM.........55 ...GPS
- VOODOO.......70 HP OMC.........58 ...GPS
- DELTA............70 hp YAM..........61
- CRITCH..........60 hp MERC........64....GPS
- VOODOO........FOR E OMC.........64.....GPS
- CRITCH...........FOR E OMC........64....GPS
- VOODOO........70 hp OMC.........64
- CRITCH...........70 hp OMC.........64
- DELTA...........70 hp YAM..........64
- VOODOO........70 hp YAM.........66
- CRITCH...........60 hp MERC.......66....GPS
- CRITCH..........70 hp YAM..........67....GPS
- VOODOO.........70 hp YAM.........68.....GPS
- VOODOO.........70 hp OMC........68....GPS
- CRITCH...........60 hp MERC.......68
- CRITCH...........SST60...............69....GPS.....3 of them
- RAPID C..........70 HP OMC........69....GPS
- ALLISON...........SST60.............70
- CRITCH...........70 hp OMC.........70...GPS
- CRITCH...........70 hp OMC.........72
- RAPID C............SST60...............73
- DELTA.............SST60................73
- VOODOO.......MOD YAM..............73
- CRITCH..........650XS.................over 73
- CRITCH..........SST60................ 73.......4 of them..GPS
- VOODOO........SST60.................74.... GPS
- CRITCH.......70 HP OMC..............74....GPS
- CRITCH..........SST60.................over 74
- CRITCH........OVAL PORT............75...GPS
- CRITCH..........70 hp OMC............76 ....GPS
- ALLISON.........70 hp OMC...........77...GPS
- ALLISON........OVAL PORT.............78 ...GPS
- CRITCH.........OVAL PORT..............80...GPS


Top
 Profile Send private message  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 50 posts ]  Go to page Previous  1, 2, 3, 4, 5

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style originally created by Volize © 2003 • Redesigned SkyLine by MartectX © 2008 - 2010